MZ-A300 Plastic Solid electronic densimeter

Contact Now

Detailed Product Description

The Maximum Weight(g):	300g	Density Precision(g/cm³):	0.001
Mixing Ratio Measurement Range:	0.1%~100.0%	Interface:	RS-232
Value Showed:	Density, Volume,%

Product Description

Density Precision: 0.001g/cm³

Value showed: Apparent density, volume, mixture ratio, density and volume change rate

Temperature compensation: The solution temperature can be set from 0℃ to 49℃

Solution compensation: The solution density can be set to 19.999

Mixture density: can set the mixture ratio of 2 kinds of mixtures

Settings: Can set the density of different kinds of mixtures and the reading time of density, volume change rate

Functions:

1. It has the function of showing mixture proportion; it can directly show the proportion value% directly.

2. It has the function of Hi limit and Lo limit, can judge whether the density of the sample is appropriate or not, and it is equipped with buzzer.

3. It can be connected to the PC and printer easily by RS-232.

4. It adopts design of big tank, it can decrease the inaccuracy caused by supporting wire’s buoyancy.

5. It has the function of density and volume change (can set the time of 1, 10, 30, 60sec)

Model		MZ-A300	MZ-A600	MZ-A1200	MZ-A151	MZ-A152
The maximum weight(g)		300g	600g	1200g	150g	150g
Density precision(g/cm³)		0.001			0.0001	0.0002
Mixing Ratio Measurement Range		0.1%~100.0%
Measurable Parameters		Density, Specific gravity, Mixing ratio, Volume
Testable sorts		Solid, Pellet, film, Floating samples……
Density range		>1,
Value showed		Density, Volume,%
Mixing ratio setting		S1,S2(Set different values to measure the mixing ratio, content of different mixture, alloy by,)
Other parameters setting		Temperature compensation, air buoyancy compensation, standard block weight, density, the upper and lower limits of specific gravity
Functional Mode	Solid Mode:	Can measure the density, specific gravity, volume value of solid, granular, floating objects, colloid
	Mixing Ratio Mode:	Can measure either of the material mixture ratio, content for the known density of two materials mixture;
Settings of Temperature and Solution Compensation		The solution density can be set to 19.999
Density setting of HI and LO limit		It can set the high limit and low limit of density
Interface		RS-232