C062 Manual hydraulic rock direct shear test machine
Rock hydraulic direct shear instrument is a new type of rock mechanical property test instrument developed and produced by our company. The instrument is a group of rock specimens of the same type subjected to horizontal shear under different normal loads, and the rock is determined according to the expression of Coulomb's law. Shear strength parameters. It is suitable for direct shear test of rock structural surface (such as joint surface, bedding surface, flaky surface, splitting surface, etc.), rock itself, and concrete or mortar and rock cemented surface.
This instrument is suitable for cutting the rock and non-metallic materials into cylindrical and rectangular regular shapes for shear strength test.
This type uses a manual hydraulic pump to pressurize, the normal and shear loading intensity values of the hydraulic pump instrument read the MPa value, and select the kN value through the calibration conversion table. Normal and shear displacements are read manually by a dial indicator. It is mainly composed of normal loading device, horizontal shear loading device, shear box, and displacement device (optional) accessories.
||Manual hydraulic pump
|Shear maximum load
|Vertical maximum load
|Shear piston stroke
|Vertical piston stroke
|Suitable for sample size
This instrument is only applicable to cylindrical test pieces and cube test pieces
Diameter: 100mm × 100mm; 50mm × 50mm; 25mm × 25mm
Side length: 100mm × 100mm; 50mm × 50mm; (optional)
|Test piece vertical and shear deformation
||Magnetic force gauge dial indicator 0 ~ 10mm, accuracy 0.001mm
||Mpa value can be read directly through the hydraulic meter, and KN value can be selected through the calibration table