Environmentally friendly constant temperature and humidity test chamber
Product volume (L): 64L/80Z/100L
Inner size (H*W*D) cm: (three boxes)
3. Temperature adjustment mode: BTHC mode (balanced temperature adjustment and humidity control mode)
4. Working environment temperature: 5~35 degrees
5. Heater: Nichrome electric wire heater
6. Humidifier: shallow trough heating humidifier
Environmentally-friendly constant temperature and humidity test chamber 1. Internal and external box material:
Inner box: mirror stainless steel plate
Outer box: stainless steel or steel plate spraying
2. Insulation material: hard polyurethane foam glass wool
3. Controller: Japan OYO or South Korea TEMI human-machine interface touch screen controller
4. Refrigeration system: France Taikang fully enclosed compressor / environmentally friendly refrigerant
5. Protection device: Compressor overheating, overcurrent, overpressure, heating humidification, empty burning, over temperature in the tank, water shortage alarm system
6. Power supply: 220VAC ± 10%
7. Standard configuration: observation window (indoor lighting), diameter 50mm cable hole (on the left side), sample holder two sets (height adjustable)
Standard configuration:
1. Power cord 4.0 mmx4 core, low impedance rubber cable 2.5m long and 1 strip
2. One RS-232C communication interface terminal (9PIN)
3. Stainless steel SUS #304 square punching steel plate rack 2 pieces
4. Stainless steel adjustable spacing 40mm rack track 2 sets
5. 11W energy-saving lighting window light
6. One 50mm test hole on the left side of the machine, one stainless steel hole cover and one silicone plug.
7. Standard test non-woven fabric 5 pieces
8. A set of fuses (wear parts)
9. One set of controller instruction manual, one set of operation instructions, one test report
