A48-A micro surfacing Mixture tread deformation tester
The experiment for the determination of micro-surfacing asphalt mixture rutting resistance vertical and horizontal deformation data.
Collecting data with an 8-channel acquisition card, connected to a computer, via software processing, recording raw data: Thrust, pull and frequency of travel, thrust deformation, deformation tension, constant vertical force. Air temperature thermostat and water thermostat different ways.
Technical Parameters
1. Voltage: 380v ± 5v
2. The rolling speed: 42 times / min ± 1 times 21 times back and forth / min
3. The level of push-pull 5kN: collect and record PC software (optional)
4. Horizontal Sliding deformation 0-500mm ± 0.01mm (optional)
5. The vertical pressure pressure adjustment 0-1.0Mpa, automatic acquisition, constant force value (adjustable setting)
6. The vertical deformation 0-10mm ± 0.001mm automatic acquisition
7. tryout internal dimensions: length 380mm * 50mm * wide and 12.7mm thick
8. Walking round the use of emulsified asphalt load wheel rubber wheel diameter 76.5mm, 26mm width
9. Temperature hot air heated sample 60 ℃ ± 1 ℃, water may also be heated (room temperature -60 ℃ ± 1 ℃).
10. Instrument dimensions: length 1.4 m * 1 m wide and 0.7 m high *
Service:
1. Warranty 1 year of replacement and return.
1, Providing factory visit and study, technical training
2, 24-hour technical support by e-mail or phone
3, Providing laboratory construction program design guidelines
4, Providing product design and OEM service
Related Equipment:
Asphalt sampler, asphalt furnace.
Packing and Shipping:
Trade Show:
Certification:
